Today we fail at the challenge but coming back strong on Monday we just have to make a few adjustments then we have the ball throwing challenge

So we just completed the ball challenge on remote now we have to complete it using autonomous. We will be working on the coding for this week 

This week we changed the gears on the bot and finished programming. We did not finish the challenge because our gears weren't meshing correctly but we fixed that, and hope to finish up the challenge as soon as possible next week. Overall we finished coding and building our bot.

We are working on the programming of the motor so it can catch the balls. We are also making little adjustments to the robot

This week we made some adjustments for our robot . So we can do the ball challenge now we just have to programm it and do the challenge

Today we worked on coding the robot, and getting the arm to work. This week we hope to practice driving, and finish coding.  Than we can start autonomous next week.

This week we were not able to get much done because we were locked out of the room due to testing. We hope to finish up the current challenge next week.

So today we finished mounting all the motors, and wireing the bot. We hope to get time on the computers to code the bot this week, and practice driving to prepare for the challenge as well.

So we now created some type of ball holder so we can drop the ball into the pipe. we are still trying to perfect it. we should be finished soon. 

So today we finished up the triangle challenge on autonomous and now we have a new challenge to get a racket ball into a PVC pipe.

We just finished the tetrahedral course and now the week we are going to make our not fit into a 18 by 18 inch box

So this week we designed like sort of a arm for the bot so we can complete our challenge . We also reset the bot to be controlled by the remote 

For this week we have a new challenge on our hands! We have to come up with something to lift these triangles on to the pvc pipes. The higher we go the higher our grade

We are still working on automated mode for the robot. The bot is going around the track perfectly one time but now we have to set it to go around 3 times. We will be fixing this throughout the whole week 

We are working on automated mode and the code for it we are half way done have to make some minor adjustments

This week we are focusing on how to code the bot and how to pair the controller to the bot, also we are learning how to do autonomous

This week we are programming the robot to work.then after that we are going to program it to go on its own.

We are finished building, and are now starting to code our bot. This is our first time coding, so we don't expect it to go perfectly, but we hope to finish by the end of the week, or mid next week.

Just finished the robot all we have to do is program it. 

This week we are continuing on finishing our robots we should be done soon and ready to test it.

then on to programming 

So today we are still building our robot we have all are parts that we need and we are still putting it all together we should be done soon!

start of week 7

This week we plan to continue gathering parts to build our robot with, and begin the process of putting together a square-bot. We also hope to see the new improvements the seniors made to there trebuchets.

start of week 6

we are still taking apart robots and waiting for the other groups to finish. we plan on building robots this week.

Week 5 post 2

We took apart robots again waiting for groups to finish so we can start building them. today we are watching the catapults go off

start of week 5

we are still disassembling bots. we are also showing another group where the tools and how to take apart a bot.